How to use abrasive belts: tips and maintenance guide

If you aspire to work better and faster, then the use of abrasive belts is indispensable for you. When it comes to proper working on a specific product, then the proper maintenance of an abrasive belt and its use is critical. There are a number of abrasive belt suppliers in the market, and this company specializes in production and distribution of such products.

Introduction to Abrasive Belts

Abrasive belts have global popularity owing to their effectiveness, with global stating deployed for product shaping, smoothing & polishing. Belt sanders are one of the most commonly used power tools to perform this. The type of abrasive belt used is dependent on the target material and finish grade.

Insights on administering belts:

Right Belt: When tackling an application, choose an abrasive belt that has a grit of suitable size. A course grit would be required for early stages while the polishing stages would require finer grit.

Inspect: Always check the belt for wear and tear because in most cases the damage goes unnoticed. A damaged belt would require the belt to be replaced as otherwise it can cause improper sanding of the surface.

Ensure the Appropriate Belt Tension is set: On the sander, make certain that the belt is tensioned correctly. Too much tension will break the belt while too little will allow slippage which decreases the effectiveness of the sander.

Push with a Consistent Force: While sanding, exert sufficient pressure on the sander but do it evenly so that the wear on the belt is or near to being normal. If the pressure is too much, the life span of the belt will decrease and the work piece will be damaged.

Ensure Maintenance of the Sander: Make it a point to clean and maintain the sander. Sand sieve and debris may collect on the sander rollers and in time affect the performance of the sander belt.

Maintenance tips for Abrasive Belts

Clean Your Incidental Dust Regularly: At all times after use, clean the belt with the help of a soft brush or compressed air to get rid of the dust among other debris. This assists to prevent clogging and enhances the life span of the belt.

Properly Store Your Abrasive Belts: The use of an abrasive away from direct sunlight should be ideal and always at room temperature. Never use heavy objects on top that would otherwise cause warping of the belts above.

Change the Direction of Your Belts: If you own several belts, intermittently change them in order to enable even wear and tear across the belts for an extended period of time using the belts.

Do away with belts when the risk is high: All belts will at one point have come edges especially cutoff and rough edges. Have them replaced once they are unable to serve their desired purpose or are cut too smooth.

Conclusion

Following the above steps together with maintenance of your FANTECH abrasive belts will last longer and operate better. Whether a craftsman for hire or a do it yourself, the purchase of quality abrasive belts and their care will certainly help in your projects and over time will be more cost effective.